Home > Windows 10 > SSD Not Working In AHCI After Windows 10 Install

SSD Not Working In AHCI After Windows 10 Install


Like some other mentioned previously, I also had to leave out the {current} part of the command line entry. Was a relatively easy fix. Please reload CAPTCHA. If you were in Louisville, I'd ask you to come by so I could get you back in, which would probably take 60 seconds. Source

Steve Dylan Morgan on January 22, 2017 at 9:03 pm said: Hey Steve, wanted to update and let you know I solved the problem by creating a 512MB recovery disk on Waleed Al-Jarah on March 31, 2017 at 1:03 am said: Thanks sooooooooo muuuuuuuuch JJ on April 6, 2017 at 12:25 pm said: Wow, great solution. Another vital chunk of information left out of this article…. Pax says: 28/03/2016 at 08:16 When i go to Advance> SATA operations> there’s only one – ACHI option! https://www.tenforums.com/drivers-hardware/15006-attn-ssd-owners-enabling-ahci-mode-after-windows-10-installation.html

How To Enable Ahci In Windows 10

Reply Leave a Reply Cancel reply Enter your comment here... Select Yes when prompted to Save Configuration and Exit. Type this command and press ENTER: bcdedit /deletevalue {current} safeboot Reboot once more and Windows will automatically start with AHCI drivers enabled. Nice.

  • The PNY website does state that if you have issues, try switching the BIOS from AHCI to RAID, and it was a last resort for me to try it after spending
  • Steve Schardein on January 22, 2017 at 1:41 pm said: Dylan, Sorry man, this blog is nothing more than a free resource I provide to help other techs like myself.
  • Run "bcdedit /?" for command line assistance.
  • Unfortunately, I can't do that for you -- so I'd suggest either finding a local tech you trust (the same thing I told someone else above) or downloading a password reset
  • All express and implied warranties, including without limitation, the warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights are expressly disclaimed to the fullest extent permitted by
  • Choose Command Prompt (Admin).

Type this command and press ENTER: bcdedit /set {current} safeboot minimal Restart the computer and enter BIOS Setup (the key to press varies between systems). You’re site is a fantastic resource; thank you for all the work that must go into maintaining it! In systems where a mSATA port is occupied by a 128 GB or superior mSATA SSD drive and the conventional hard drive bay is occupied by a 2.5″ (laptops) or 3.5″ How To Tell If Ahci Is Enabled Windows 10 Review the notes below to change the operation according to your particular setup.

So again, my apologies that this didn't work out for you because you didn't have your local admin password handy. Raid To Ahci Windows 10 That's all there is to it!  Special thanks to Toobad here for outlining this procedure. And it's certainly FAR from perfect. http://www.tomshardware.com/answers/id-2795928/switch-ide-ahci-windows.html If your system has a 30-60 GB mSATA Solid State State Cache Drive and a conventional hard drive you should review this document here and change the SATA operation to Intel

After a few failed boots startup repair gave me the option to open SAFE MODE with Networking, where I found your article! Change Ide To Ahci Windows 7 https://www.tenforums.com/tutorials/2304-safe-mode-start-windows-10-a.html Steve David on January 13, 2017 at 9:31 am said: I had the same error as Mark ("The set command specified is not valid."), I'm running a brand new Windows I got the board to finally keep settings set for AHCI mode and then Windows kept giving me boot_device_inaccessible because it was trying to load the IDE drivers. You are correct, it can still boot to the Dell OEM diagnostics partition after the change to AHCI.

Raid To Ahci Windows 10

If you're tinkering with your PC and you aren't prepared to deal with possible mishaps or other unintended consequences, you're doing so at your own risk! https://pricklytech.wordpress.com/2014/02/04/windows-8-1-enabling-ahci-after-installing-windows/ Any further assistance will be greatly appreciated. How To Enable Ahci In Windows 10 RAID SATA configuration may be used with 2 matching hard drives. How To Check If Ahci Is Enabled Windows 10 Should have waited.

T. this contact form Proudly powered by WordPress The Unofficial Windows 10 Reinstallation Guide Windows OEM FAQs and Downloads Unified Extensive Firmware Interface (UEFI) Download Windows 10 OEM or Retail .iso Download Windows Save changes and exit Setup and Windows will automatically boot to Safe Mode. I don’t know either program you are trying to use but at first glance both seem fairly outdated and probably will not work on new hardware. Windows 10 Ahci Driver

In such cases the SATA operation should be changed to AHCI to allow direct Windows installation. In the BIOS setup there should be a category called onboard devices, use the arrow keys to highlight it and press enter to expand this category.Go to SATA operation. Worked like a charm. http://megathud.com/windows-10/thinkpad-yoga-14-cannot-install-windows-10.html It's sort of like locking the door behind you on the way out of your house and forgetting that you changed your garage keypad code.

Why didn't you say anything about making sure you have the local account password before you try to boot into safe mode!? Samsung Magician Says Ahci Is Disabled Ady on March 29, 2017 at 5:53 am said: It worked flawlessly for me. MR C A STAVELY on January 16, 2017 at 2:30 pm said: Tried this fix just now to find that now instead of just freezing, my pc now just decides to

I had to set the SATA to RAID in the BIOS in order to install Windows7 on the PNY SSD, just in case anyone else with a late 2010 XPS8300 has

Post to Cancel %d bloggers like this: Share Tweet Additional Info A Clean Install of Windows 10 TH2 - Video TutorialPrivacy Policy I have 1 512 GB MX200 in SATA0 and then 2 1 TB HDDS in SATA 2 and SATA 3 with the SSD in the space for the second optical drive. I was thinking I would have to reinstall Windows.. What Is Ahci Mode Steve Schardein on December 13, 2016 at 4:19 pm said: No registry editing, it's Command Prompt.

Much of it is advanced material. Please help, DELL Inspiron 5748 Reply philipyip says: 28/03/2016 at 16:57 Modern systems designed to only have one drive and hence will only have AHCI as the SATA operation… No sense You need to get ahold of a local technician you trust to help you out. http://megathud.com/windows-10/system-doesn-t-detect-cd-dvd-drive-after-windows-10-install.html Sam on January 14, 2017 at 4:24 pm said: When I switch from Raid to ACHI then save and exit it just says "Missing Operating System".

On that point, @DellCares was amazing for the support provided while I was scratching my head as to why everything I was reading online (here as well as others) wasn’t working. This did it. You agree that use of the advice on this blog is entirely at your own risk and that this website is provided on an "as is" or "as available" basis, without As for it being a different password for Safe Mode… well, that part still has me confused as well.

Yat on February 16, 2017 at 9:45 am said: Hey Steve, I have Windows 7 installed on my laptop, would this be a problem if I changed AHCI? I successfully switched it to safe mode before this, is there anything I can do? Microsoft customer service couldn't help me, suggested I drive an hour to the nearest Microsoft store for help… Dylan Morgan on January 22, 2017 at 1:39 pm said: Oh and there's five + 8 = DISCLAIMER The advice here is meant for education and reference only, and it is intended for professionals, NOT the average user.

And on top of that my keyboard isn't working either. You'll have to call a locksmith to get yourself back in, and after that, write down your passwords and don't forget them! What should i do? In any case Intel Smart Response Technology is long obsolete as SSDs have a large enough capacity and are affordable to be used as a standard boot drive.

Now I get a message after the POST screen from Intel RST that my two drives are non-RAID, but at least the SSD works. For desktops without mSATA ports a 2.5″ 128 GB or superior SSD can be installed using a 2.5″ to 3.5″ converter. If I tried to cover every possible variable every time I sat down to donate my time to writing up an article for other techs to have at their disposal, it Good luck, it should be an easy fix.

This detail should be added to the above description. it says: PS C:\WINDOWS\system32> bcdedit /set {current} safeboot minimal The set command specified is not valid. Perhaps Windows 10 simply always requires a local account login (rather than MS account) in Safe Mode operation and I've never noticed it! The parameter is incorrect.

If all your connectors are IDE its probably time to upgrade your entire system as Windows 7 won’t run well on such poor hardware., the hard drive is likely to fail Direct installation on a drive this size is not recommended as the drive is too small to comfortably fit a Windows installation. Now I am stuck having to buy a 16gb flash drive so I can make boot media to repair this mess. You can boot into the diagnostics partition so would the change from RAID to AHCI kill that boot or would it still work?